Custom Casters


Custom casters – produced to meet your custom specifications by Algood Caster Innovations.

In over forty years of manufacturing, we have produced many custom casters. All of the casters presented on this page were produced to meet custom specifications. We hope that by viewing our custom caster products you will either find a caster that meets your requirements or one that can be re-designed to do so. If you do not see the caster, stem, or wheel you are looking for, please call our Customer Service department or send us a message .

[-] Click to enlarge
20,000 LBS BMF

20,000 lbs Dual Presson Rubber swivel caster with 2-position swivel lock custom designed to move extreme loads effortlessly. All dimensions custom engineered upon request.

[-] Click to enlarge
16” PNEUMATIC

Designed for the roofing industry to move large loads across flat roofs preventing damage to the roof’s membrane. May be used on soft surfaces.

[-] Click to enlarge
8” DUAL PNEUMATIC

Algood Caster Innovations’s 8” Dual Pneumatic caster with a 3” diameter x 12” long pipe is custom designed to convey scaffolds and platforms on uneven floor surfaces.

[-] Click to enlarge
TYPHOON DUAL CASTER

This dual Pneumatic combination guarantees a smooth ride, along with an increased capacity. The Typhoon head enables a long durable life for the caster, especially in tow line applications.

[-] Click to enlarge
10”X4” CYCLONE

Custom designed 10”x4” Heavy duty Cyclone Kingpinfree™ caster created to be easily mounted & demounted on 8”x10” I-Beams. A steering bar is welded on one side of the leg.

[-] Click to enlarge
QUAD MONSOON SPRING LOADED

This high-precision engineered caster was custom manufactured with strict specifications. Four 6”x 2 1/2” Envirothane™ wheels with precision bearings, enable a smooth & even ride for even the most sensitive applications. Each wheel correctly deflects and/or cautiously supports as required with heavy-duty die spring. It is equipped with a 4PSL and the UWB locks all 4 wheels simultaneously.

[-] Click to enlarge
DUAL MONSOON SPRING LOADED

This Dual Monsoon Kingpinfree™ caster is Spring Loaded and custom built to accommodate 5,000 lbs. The Spring Loaded deflection prevents vibration from traveling to the mobile unit, protecting vital product during transport. High Temperature wheels provided for high heat application. 4 Position Swivel Lock converts swivel to rigid caster.

[-] Click to enlarge
CUSTOM GATE SPRING LOADED

Custom Heavy Duty Gate Spring Loaded for extremely heavy metal gate. Gate housing is structurally reinforced to tolerate abusive and demanding application.

[-] Click to enlarge
HOG™ and HOG™ SPRING LOADED

The HOG’s™ unique patented design offers visual beauty and total functionality expected in a high quality caster. The HOG™ is available in swivel with Universal Wheel Brake with Exceptional Positive lock. A variety of top plates and stems are available. All 6” x 2” wheels can be accommodated in the HOG™. Capacity. – 900 lbs Spring Loaded capacity – 1,750 lbs.

[-] Click to enlarge
EMAXX™ w/OFFSET PLATE

What do you do when a customer requires a greater offset in order to have acceptable clearance from the bottom of their manufactured unit that is ready to ship but has no casters? We solved their problem by offsetting the plate to one side to the furthermost possible point.

Golf LogoGolf Logo