

Rubber Wheels
Rubber wheels from Algood come in four major types:
ProTech™ Thermo-Plastic Rubber
Hard Rubber
Soft Rubber
Moldon Rubber
ProTech™ Thermo-Plastic Rubber
Used for medium loads - capacities from 250 - 600 lbs. This non-marking ProTech treaded wheel is securely
fastened to its polyolefin core. It is highly resistant to most chemicals and excellent for all floor surfaces.
Rust-proof, quiet and easy rolling, this wheel is shock absorbing and will reject floor debris.
Applications:
- Platform Trucks
- Food Service Equipment
- Hotel Equipment
- Small Waste Bins
- Textile Carts
- Abusive Applications
ProTech™ Thermo-Plastic Rubber Wheel Specifications:
- Wheel Diameter: 4" - 8"
- Tread Width: 1 1/4" - 2"
- Load Capacity: 250 - 600 lbs.
- Hub Length: 1 5/8"- 2 3/16"
- Bearing Type: Plain, Ball, Roller
Options:
- Delrin Bearings
- Caged Roller Bearings
- Thread Guards
[-] Back to Top
Soft Rubber Wheels
Used mainly for light loads - load capacities from 80-350 lbs. These rubber wheels have a soft rubber tread with a hard core for quiet movement, smooth ride and excellent floor protection.
Applications:
- Display Racks
- Food Service Equipment
- Hospitals
- Hotels
- Restaurants
Soft Rubber Wheel Specifications:
- Wheel Diameter: 2"-5"
- Tread Width: 7/8"-2"
- Load Capacity: 80-350 Lbs.
- Hub Length: 1"-2 1/4"
- Bearing Type: Plain
Options:
- Soft Rubber Gray (SRG)
- Conductive Soft Rubber (CSR)
- Ball Bearings (BB)
- Roller Bearings (RB)
[-] Back to Top
Hard Rubber Wheels
Used mainly for higher load capacities of 150-275 lbs. They offer good floor protection and easier mobility and will not develop flat spots under standing loads. They have a high resistance to oil, grease and mild or diluted acid.
Applications:
- Abusive Applications
- Moisture Friendly
- Factory Use
- Food Service Equipment
- Hotel Equipment
- Large Stock Trucks
- Platform Trucks
- Small Waster Bins
- Textile Carts
Hard Rubber Wheel Specifications:
- Wheel Diameter: 2 1/2"-5"
- Tread Width: 1 1/8"-1 1/2"
- Load Capacity: 150-275 Lbs.
- Standard Bore: 5/16"-3/8"-7/16"
- Bearing Type: Steel - Plain - Nylon
[-] Back to Top
Moldon Rubber Wheels
Used in very heavy load requirements of 280 lbs. - 2,000 lbs. and are:
Economical
Quiet and easy rolling
Excellent for abusive applications
Shock and vibration absorbing
Good for floor protection
Ideal for moist and wet environments
Effective in rejecting floor debris
Applications:
- Factory Use
- Food Service Equipment
- Hotel Equipment
- Large Stock Trucks
- Platform Trucks
- Textile Carts
Moldon Rubber Wheel Specifications:
- Wheel Diameter: 4"-16"
- Tread Width: 1 ½"-5"
- Load Capacity: 280-2,000 Lbs.
- Standard Bore: 1 3/16"-2.44"
- Bearing Type: Plain - Roller - Tapered
[-] Back to Top









