Canada's Largest Caster Manufacturer
Custom Casters
Custom casters - produced to meet your custom specifications by Algood.
In over forty years of manufacturing, we have produced many custom casters. All of the casters presented on this page were produced to meet custom specifications. We hope that by viewing our custom caster products you will either find a caster that meets your requirements or one that can be re-designed to do so. If you do not see the caster, stem, or wheel you are looking for, please call our Customer Service department or send us a message .
[-] Click to enlarge20,000 LBS BMF
20,000 lbs Dual Presson Rubber swivel caster with 2-position swivel lock custom designed to move extreme loads effortlessly. All dimensions custom engineered upon request.
[-] Click to enlarge16” PNEUMATIC
Designed for the roofing industry to move large loads across flat roofs preventing damage to the roof’s membrane. May be used on soft surfaces.
[-] Click to enlarge8” DUAL PNEUMATIC
Algood’s 8” Dual Pneumatic caster with a 3” diameter x 12” long pipe is custom designed to convey scaffolds and platforms on uneven floor surfaces.
[-] Click to enlargeTYPHOON DUAL CASTER
This dual Pneumatic combination guarantees a smooth ride, along with an increased capacity. The Typhoon head enables a long durable life for the caster, especially in tow line applications.
[-] Click to enlarge10”X4” CYCLONE
Custom designed 10”x4” Heavy duty Cyclone Kingpinfree™ caster created to be easily mounted & demounted on 8”x10” I-Beams. A steering bar is welded on one side of the leg.
[-] Click to enlargeQUAD MONSOON SPRING LOADED
This high-precision engineered caster was custom manufactured with strict specifications. Four 6”x 2 1/2” Envirothane™ wheels with precision bearings, enable a smooth & even ride for even the most sensitive applications. Each wheel correctly deflects and/or cautiously supports as required with heavy-duty die spring. It is equipped with a 4PSL and the UWB locks all 4 wheels simultaneously.
[-] Click to enlargeDUAL MONSOON SPRING LOADED
This Dual Monsoon Kingpinfree™ caster is Spring Loaded and custom built to accommodate 5,000 lbs. The Spring Loaded deflection prevents vibration from traveling to the mobile unit, protecting vital product during transport. High Temperature wheels provided for high heat application. 4 Position Swivel Lock converts swivel to rigid caster.
[-] Click to enlargeCUSTOM GATE SPRING LOADED
Custom Heavy Duty Gate Spring Loaded for extremely heavy metal gate. Gate housing is structurally reinforced to tolerate abusive and demanding application.
[-] Click to enlargeHOG™ and HOG™ SPRING LOADED
The HOG’s™ unique patented design offers visual beauty and total functionality expected in a high quality caster. The HOG™ is available in swivel with Universal Wheel Brake with Exceptional Positive lock. A variety of top plates and stems are available. All 6” x 2” wheels can be accommodated in the HOG™. Capacity. - 900 lbs Spring Loaded capacity - 1,750 lbs.
[-] Click to enlargeEMAXX™ w/OFFSET PLATE
What do you do when a customer requires a greater offset in order to have acceptable clearance from the bottom of their manufactured unit that is ready to ship but has no casters? We solved their problem by offsetting the plate to one side to the furthermost possible point.
[-] Click to enlargeJACKING CASTER
Mounted vertically to the unit elevated by manual crank effortlessly to desired position.
Custom designed to accommodate any weight capacity and application. Customized mounting bracket available.
[-] Click to enlargeTORNADO HEAD
This heavy capacity, low profile caster is ideal for Rack Moving equipment. This custom unique caster is engineered with a 3” x 3” steel wheel, a 1”-8 x 4” treaded stem, with a 2500 lb. capacity.
[-] Click to enlargeSTEERING CASTER
This 10”x2 1/2” Kingpinfree™ Typhoon caster is custom designed to travel in the lead position to steer. This enables the caster to be pulled at the front of the unit and steer. Weight capacity is 950lbs.
[-] Click to enlarge6 x 2 PNEUMATIC MAXX™
This 6”X2” Pneumatic fits in the Maxx™, EMaxx™ and 7000 series. The pneumatic cushion is excellent for applications where floor and equipment protection are vital. Quiet ride and ease of rolling provided by air pressure. Excellent for delicate materials and uneven rough floor surfaces.
[-] Click to enlargeeHABS – Emergency Hand Activated Brake System™ - patent pending
The Hand Braking Device (HBD) is a most innovative product custom designed by Algood. The HBD has many possibilities that allow for a brake or swivel lock to be engaged and disengaged by hand, instead of the conventional foot operated devices. The HBD is excellent for ergonomically challenged applications. As well, the brake can be engaged with greater speed than foot activated brakes.
[-] Click to enlargeHUB CAPS
A variety of customized rims are available on 2” treaded casters. All of these wheels are manufactured with Algood’s RollX™ material.
[-] Click to enlarge
WOW™ HUB CAP
WOW™ Hub Cap enhances the caster and your product! Uniquely designed to resemble a Mag wheel in motion at stationary position. When in motion, WOW™ rotates with the wheel. Available in 5” x 2” and 6” x 2” wheels. Available in Chrome, Black, Copper and Brass.
[-] Click to enlargeLL SERIES
This die-cast aluminum leveling caster allows for moving heavy equipment. Once the equipment is in place, there is an adjustment knob in the back that is turned which brings down the foot or pad, lifting the wheel off the ground to prevent rolling. The foot is raised until the unit is level.
[-] Click to enlargeLight-Duty SPRING LOADED
Specifically designed for equipment that must be protected from shock, vibration and noise reduction. The custom design gives vertical deflection in response to a light load. It will provide smooth shock absorption & will not suddenly bottom out. This caster will provide a smooth ride if dropped or subjected to a sudden impact. Algood’s Spring Loaded Indicator is included, enabling user to estimate weight load on product.
[-] Click to enlargeWIZARD
Dramatically enhance your product or display with our plastic Coloured Caster series. Available with ALock™ brake and weight capacity is 250lbs.
[-] Click to enlargeRETRACTABLE CASTER
Retractable caster custom designed to move stationary merchandise at a push of a foot. By engaging the foot pedal, the unit rises off the permanent unit feet to ride on the casters. Excellent for kiosks and display tables.
[-] Click to enlargeBANDIT™ RIM
Bandit™ Rim is an aluminum core with Algood’s RollX™ material bonded to the core. Don’t be fooled by the cool looks, the Bandit™ has a capacity of 900 lbs. Ideal for detail enthusiasts. Wheel is non-marking and extremely ergonomically efficient, as it requires minimum effort to roll and swivel with heavy loads.
[-] Click to enlargeAIR FORCE CASTER
A uniquely designed and custom engineered caster featuring special overall height with a 6 ”x 2” Envirothane™ wheel and thread guards. Two specially placed 4 position swivel locks, lock the swivel and the plate in position in a cargo container for transferring of sensitive components and material.
[-] Click to enlargeTUBE CASTER
Originally designed to be mounted on a table leg to accommodate tubing. 4 Position Swivel Lock converts swivel caster to rigid by engaging plunger. ALock™ engaged to lock wheel.
[-] Click to enlargeSIDE-MOUNT LADDER CASTER
Our 1900 series offers two models of the Ladder Spring Loaded casters. Available in a left or right sided version, these casters are excellent for inside/outside use, especially where rolling surface is uneven. This side mountable caster is excellent as a gate caster. Excellent for low clearance requirements. This unit has a low 8.1” overall height.
[-] Click to enlarge6” HOSPITAL CASTER
Algood’s Hospital Caster is a 6” swivel caster with directional lock, ALock and swivel lock. Wheels are nylon core with polyurethane treads and precision bearings in both wheels. The steel stem has a Cam hole for a profile bar. Weight capacity is 300lbs.
[-] Click to enlargeSQUARE CUP STEM
This 1-1/2” x 1-1/2” I.D. square cup stem is available in our 5000 & 5300 series. The stem comes pre-drilled on 3 sides to accept wood or metal legs.
[-] Click to enlargeICE™ WHEELS
Cool ICE™ wheels are manufactured with a polyolefin core & polyurethane tread in a variety of vibrant colours. ICE™ wheels fit in a variety of series and are standard with Precision Ball Bearings. Available in 2”, 2 1⁄2” & 3” diameter wheels, with capacity of up to 90lbs.
[-] Click to enlargeDUAL 5000 SERIES
Dual ICE™ wheels inserted in the 5000 series to enhance weight capacity and provide a dynamic effect.
[-] Click to enlargeCASTERBOOT
The Casterboot™ is a revolutionary system created to save you time and money. Casterboots™ will convert virtually any stationary table into a rolling table in seconds. The Casterboot™ has been custom designed to simply work as a boot. You slip it on and turn the knob. It’s that easy! No more complex installations and broken parts. Many sizes available.
[-] Click to enlargeB06D PLATE
This custom designed plate was engineered to protect a heavy application which would not transfer point load directly onto the application. In fact, it’s unique embossed plate design, allows for shock distribution. This progressive plate is very competitively priced, while solving application failures.
[-] Click to enlargeEGOOL™
Egool™ is new addition to the Algood line. Ideal for store fixtures as well as institutional & food service equipment. Egool™ is available in a standard silver finish, or a variety of colours with a 67mm diameter Polyolefin wheel and a 437S x 7/8 friction stem. It is available in swivel only, no brake. Weight capacity is 75lbs.
[-] Click to enlargeJ CASTER
This 65mm creatively designed nylon caster is available with all stems & fastenings, including translucent wheels. Pedal wheel lock available. Custom colours available upon request. Weight capacity is 125lbs.
[-] Click to enlargeADJUSTABLE HEIGHT CASTER
Designed to accommodate uneven floors and various overall heights where accurate and on sight leveling are critical. This custom caster evolves from our swivel 2003 series with 5/8” bolt hole with 3/4” x 5 ” threaded stem and double locking brake stem locks swivel and wheel.
